1, corrugated box size: corrugated box size is divided into internal size, manufacturing size, external size, respectively, that is generally mm units.

2, sticky / nail bar: also called overlapping tongue. In order to corrugated carton forming encirclement whereas in the case of one out, stick / nails with high heels corrugated carton, the length is generally: pin 35 ~ 40mm 30 ~ 35mm; adhesion.
3, shake lid: also known as E cover, divided into outer shake cover and inner shake cover. Generally, the long side of the rocking lid is placed outside for the outer shake lid, folded when folded; the wide swing cover is placed inside for the inside shake lid, and the fold does not close. The corrugated carton can be divided into several kinds according to the different length of the inside and outside covers.
4, carton: corrugated box printing products with a name, number and size of carton and other patterns and text. The contents of the box label determined by the customer, according to the printing position can be divided into positive mark, side mark, mark is printed on the box of the long direction, side mark printed on the box width direction; if the box length direction of two-sided printing of different content, in order to distinguish, is divided into a mark to mark and mark is a mark; for even a long nail direction strip, the other side is mark.
5: slotting: shake the opening between the lid, the height of the roll with the height of the lid.
6, hand in hand: also called the buckle. Generally in the corrugated side, often two round of the rectangular shape, the upper half of the rest of the beer line wear, wear; hand to determine the size and position according to the requirements of customers, not to the general pattern of beer.
7, high and low lines: corrugated carton of high and low lines refers to the corrugated carton, inside and outside the roll cover of the pressure line is not in the same line; inner shake cover line than the outer roll cover line is low, about a corrugated thickness.
8. Post-pressprinting: the production process that enables printed products to obtain the required shape and performance.
9, die cutting: diecutting steel blade into a mold (or die with steel plate), box. In a die cutting machine, the paper is rolled into a certain shape.
10, indentation: Crease/Score using steel wire, through the imprint, in the paper to press out traces or leave for bending groove mark. Usually finished by die cutting machine.
11, bonding: Joint commonly used bonding methods, glue, self-locking (selflock), tape sealing (tape), Staple, and so on.
12, stapling nails: and wide box nail combined with. Nail box for low carbon alloy steel flat wire with plating, according to the number and spacing of the nail can be divided into single and double screw nail, nail and nail fold line according to the angle can be divided into horizontal, vertical and oblique nail nail nails, the most commonly used oblique nail.
13, adhesion: Stick / nail strip and wide surface with adhesive bond. The binder is starch or other equivalent adhesive, not sodium silicate.